Nickel determination in osteoblast-like cell culture medium by adsorptive cathodic stripping voltammetry with a mercury microelectrode

The purpose of this study is to investigate the influence of nickel, which is an alloying element in commonly used metallic biomaterials, on the biomaterials mineralization process. An electrochemical method was developed to quantify this metal ion in osteoblast-like cell culture medium (OST) by performing adsorptive cathodic stripping voltammetry (CSV) with dimethylglyoxime (DMG) at a mercury film microelectrode (MFM). The optimized analytical conditions and the square-wave CSV parameters for the analysis are: DMG concentration: 5.00 × 10⁻⁴ mol L⁻¹; ammonium chloride buffer: 0.10 mol L⁻¹ (pH 9.2); frequency: 50 Hz, amplitude 20 mV; step: 2 mV; adsorption time: 10 s, deposition potential: −0.70 V and reduction potential: −1.20 V. The limit of detection was 7.70 × 10⁻⁹ mol L⁻¹ for an adsorption time of 10 s. The results achieved by CSV using the MFM were compared to those obtained by atomic absorption spectrometry (AAS) to ensure the reliability of the electrochemical method. The mineralization process was evaluated by biochemical and histochemical assays.     

Independent exponential feeding of glycerol and methanol for fed-batch culture of recombinant Hansenula polymorpha DL-1

As a novel feeding strategy for aptomizing human epidermal growth factor (hEGF) production with a recombinant Hansenula polymorpha DL-1 using the methanol oxidase (MOX) promoter in H. polymorpha DL-1, independent exponential feeding of two substrates was used. A simple kinetic model considering the cell growth on two substrates was established and used to calculate the respective feeding rates of glycerol and methanol. In the fedbatch culture with methanol-only feeding, the optimal set point of specific growth rate on methanol was found to be 0.10 h⁻¹. When the fed-batch cultures were conducted by the independent feeding of glycerol and methanol, the actual specific growth rate on glycerol and methanol was slightly lower than the set point of specific growth rate. By the uncoupled feeding of glycerol and methanol the volumetric productivity of hEGF increased from 6.4 to 8.0 mg/(L·h), compared with methanol-only feeding.     

Effect of the shear rate on pullulan production from beet molasses by Aureobasidium pullulans in an airlift reactor

The effect of the shear rate on pullulan production from beet molasses by Aureobasidium pullulans P56 in an airlift reactor was investigated. A maximum polysaccharide concentration (18.5 g/L), biomass dry weight (14.0 g/L), polysaccharide yield (38.5%), and sugar utilization (96%) was achieved at a shear rate of 42 s⁻¹. A. pullulans grown on beet molasses produced a mixture of pullulan and other polysaccharides. The highest value of pullulan proportion (30% of total polysaccharide) was obtained at a low shear rate (42 s⁻¹). The apparent viscosity of the fermentation broth increased as the shear rate increased up to 42 s⁻¹ and then decreased. On the other hand, the dissolved oxygen concentration and the volumetric mass transfer coefficient increased with the increase of the shear rate from 21 to 84 s⁻¹. The external addition of L-glutamic acid, olive oil, and Tween-80 improved significantly the production of crude polysaccharide (27.0 g/L), but the pullulan content of the polysaccharide was low (20%).     

微流控芯片技术在生命科学研究中的应用

微流控芯片最初起源于分析化学领域,是一种采用精细加工技术,在数平方厘米的基片,制作出微通道网络结构及其它功能单元,以实现集微量样品制备、进样、反应、分离及检测于一体的快速、高效、低耗的微型分析实验装置.随着微电子及微机械制作技术的不断进步,近年来微流控芯片技术发展迅猛,并开始在化学、生命科学及医学器件等领域发挥重要作用.本文首先简单介绍了微流控芯片制作材料和工艺,然后主要阐述了其在蛋白质分离、免疫分析、DNA分析和测序、细胞培养及检测等方面的应用进展.     

成骨肿瘤细胞在纳米氧化钛陶瓷表面的生物活性研究

以羟基磷灰石和氧化镁为晶粒生长抑制剂制备的纳米氧化钛陶瓷为研究对象, 采用体外成骨细胞Ros17/28与材料复合培养的方法, 通过MTT法、荧光染色法和SEM细胞形貌观察等手段综合判断细胞在材料表面的活性, 以此评价纳米氧化钛陶瓷的生物活性. 结果表明, 以羟基磷灰石为晶粒生长抑制剂的氧化钛陶瓷晶体颗粒尺寸达到纳米级, 其生物活性超出了以氧化镁为晶粒生长抑制剂的氧化钛陶瓷和纯羟基磷灰石陶瓷, 具有优异的生物相容性, 是生物活性陶瓷.     

Study of Sb‐doped SnO2 Gray Ceramic Pigment with Cassiterite Structure

In this study, Sb_xSn_1?xO₂ (0 ≤ x ≤ 0.5) compositions were synthesized by the ceramic method from Sb₂O₃‐SnO₂ and Sb₂O₅‐SnO₂ mixtures and characterized by Differential thermal analysis (DTA) and thermogravimetric analysis (TG), X‐ray diffraction, UV‐V‐NIR spectroscopy and CIE L*a*b* (Commission Internationale de l'Eclairage L*a*b*) parameters measurements. Solid solutions with cassiterite structure were obtained at 1300 °C. These solid solutions are stable into glazes. From Sb₂O₃, light gray coloured materials were obtained. From Sb₂O₅, bluish gray coloured materials were obtained at 1300 °C/6h when x ≥ 0.3. Sb_xSn_1?xO₂ with 0.3 ≤ x < 0.5, T = 1300 °C and Sb₂O₅ might be established as compositional range, fired temperature and antimony precursor to obtain gray ceramic pigments in this system.     

Analysis of Early Medieval Glass Beads – The Raw Materials to Produce Green, Orange and Brown Colours

 Monochrome coloured glass beads of the Merovingians (5^th–7^th cent. AD) have been examined by different analytical methods. The elemental composition of a large number of mostly unprepared beads have been measured non-destructively by X-ray fluorescence analysis. After subtracting the content of the colouring oxides of the glass beads and normalising the residual values to 100% an identical soda-lime-glass matrix was obtained. X-ray diffraction was used for the identification of the crystalline colouring and opacifying pigments (SnO₂, Cu, Cu₂O, PbSnO₃), and scanning electron microscopy as well as electron probe microanalysis were applied to study the microstructure and the composition of white, brown, green, orange and yellow coloured glass beads. Oxidised metals, alloys (lead, copper, bronze, brass and mixtures of them) and iron smelting slag have been identified as raw materials to colour the soda-lime-glass.     

Simple diffuse reflectance UV-vis spectroscopic determination of organic pigments (fringelites) in fossils

To screen for organic pigments, like fringelites or porphyrins, in sediments and fossil specimen, a simple diffuse reflectance UV-vis spectroscopic determination was developed. In contrast to common inorganic pigments, like Fe₂O₃, these pigments exhibit well-structured characteristic absorption peaks which allow their recognition. This method was then used to identify fringelite H in a non-crinoidSolenopora species from the Jurassic. Reflectance FTIR spectroscopy proved not to be useful for this purpose.     

Concavine, an unusual diterpenic alkaloid produced by the fungus Clitocybe concava

A novel alkaloid with an unprecedented ring system consisting of a dodecahydro-7-oxa-9a-aza-benzo[a]azulene ring (1), has been isolated from cultures of Clitocybe concava (Basidiomycetae). Its structure and relative stereochemistry were elucidated on the basis of spectroscopic data. Concavine presents a weak antibacterial activity.     

Beiträge zur Chemie der Pyrrolpigmente, 44. Mitt.: Gallenfarbstoffe als Ionophore

The carrier mediated transport of cations using model compounds of the verdinoid and rubinoid bile pigment structural type as ionophores is studied. Verdinoid bile pigments turn out to be very effective carriers for cations exhibiting a pronounced selectivity for certain transition metal ions like Cr^+-+, Fe⁺⁺, Cu⁺⁺ and Zn⁺⁺. The scope of this behaviour of verdinoid bile pigments is compared to [18]-crown-6 and meso-tetraphenylporphin and is discussed with regard to structural, biological, analytical and technical implications.